The ROOM BOX TREE STAND includes:
1. One TREE, made from oak, 68" high and 1 1/2" square, with a 3/4" wide by 1/4" deep grove cut into one side to accommodate tape or round wire.
2. One base with four legs, made from oak, that attach to the TREE. The base is 27 1/4" wide at the floor.
3. Two BRANCHES, made from oak, which can be positioned anywhere on the TREE. (Each BRANCH slides onto the TREE and is secured by tightening a wing nut)
4. Two ROOM BOXES, wood parts made of oak veneer plywood. Inside dimensions are 15 1/4" wide, 9 3/4" deep, and 10 3/4" high. Each has a removable Plexiglas front. The front top of the box is half Plexiglas, which is removable and half wood that is stationary. The wood top allows for ceiling lights to be installed, while the Plexiglas half allows for natural lighting from above.
5. Two sets of wiring connections that will be used to get the electric from the tape wire to the back of the ROOM BOX. (Each box has a wire access slot in the back at floor level)
6. Two round holders. Each BRANCH is fitted with a 3/4" round raised holder to secure the ROOM BOX to the branch while allowing for its rotation. In addition, the ROOM BOX can be easily removed from the holder so you can move it to your work area.
